IC-V8 General (LM) version

รหัสสินค้า: 000195

call

รายละเอียด: VHF AND UHF TRANSCEIVERS
--------------------------------------------------------------------------------
IC-V8 General (LM) version

--------------------------------------------------------------------------------

Professional quality and functions

Simple operation and tough construction


54×132×35 mm compact body


Powerful 5.5W of output power


100 memory channels plus 1 call channel


5 character alphanumeric display


Priority, program, memory, skip and tone scanning


Built-in CTCSS and DTCS encoder/decoder


Built-in DTMF encoder


Indicated “Function + Short-cut” menus


Ni-MH or Ni-Cd battery pack available


Optional DTMF decoder unit, UT-108 with ANI


Optional voice scrambling unit, UT-109 or UT-110





--------------------------------------------------------------------------------
SPECIFICATIONS

GENERAL
Frequency coverage : : 136–174MHz*
*Guaranteed range 144–148MHz


Mode : FM (F3E, F2D)
No. of memory Ch. : 107 (incl. 6 scan edges and 1 call)
Frequency stability : ±10ppm (–10°C to +60°C)
Operating temperature range : –10°C to +60°C; +14°F to +140°F
Power supply requirement : 7.2V DC (6.0–10.3V DC accept able; Icom’s battery pack only)
Current drain (at 7.2V DC) : Tx 5.5W 2.0A
0.5W 0.8A
Rx Max. audio 250mA
Standby 70mA
Power saved 20mA


Antenna connector : BNC (50Ω)
Dimensions (proj. not incl.) : 54(W)×132(H)×35(D) mm;2 1⁄8(W)×53⁄16(H)×13⁄8(D) in
Weight (approx.) : 350g; 12.3oz (w/ant. and BP-222)

TRANSMITTER
Output power (at 13.2V DC) : High 5.5W
Low 0.5W


Spurious emissions : Less than –60dB
Max. freq. deviation : ±5.0kHz
Ext. mic. connector : 3-conductor 2.5(d)mm (1⁄10″) /2.2kΩ

RECEIVER
Receiving system : Double conversion superheterodyne
Intermediate freq. : 1st 21.7MHz
2nd 450kHz


Sensitivity : 0.16µV (typ.; at 12dB SINAD)
Squelch sensitivity : 0.10µV (typ.; threshold)
Selectivity : 65dB (typical)
Intermodulation : 75dB (typical)
Spurious and image rejection: : 75dB (typical)
Audio output power (at 7.2V DC) : 300mW with an 8Ω load
Ext. SP connect : 3-conductor 3.5(d)mm (1⁄8″) /8 Ω



Supplied accessories
Battery case or battery pack*

Desktop charger*

Antenna

Belt clip
*depending on version
Applicable U.S. Military Specifications

Standard MIL 810C MIL 810D MIL 810E MIL 810F
Method Procedure Method Procedure Method Procedure Method Procedure
Low pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II
Low temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II
Temp. shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I
Rain 506.1 I, II 506.2 I, III 506.3 I, II 506.4 I, II
Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 -
Salt fog 509.1 I 509.2 I 509.3 I 509.4 -
Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII, X 514.3 I 514.4 I 514.4 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV

All stated specifications are subject to change without notice or obligation.

--------------------------------------------------------------------------------
OPTIONS

BATTERY PACKS AND CASE

BATTERY PACKS
AND CASE BP-208 BP-209 BP-210 BP-222
OUTPUT POWER 5.5W typ.* 5.5W typ. 5.5W typ. 5.5W typ.
BATTERY LIFE – 7.5hours 11hours 4.0hours


Approx. battery life; Tx (Hi): Rx: standby=5:5:90 with auto power save
* The LOW output power selection is recommended.


BC-146 DESKTOP CHARGER + BC-147A/E AC ADAPTER



Charges a battery pack, BP-209, BP-210 or BP-222 with/without transceiver in 12, 18.5, 6.5 hours (approx.), respectively.
BC-137 is also available for regular charging.

BC-144 DESKTOP CHARGER + BC-145A/E/V AC ADAPTER



For rapid charging of battery pack, BP-209, BP-210 or BP-222. An AC adapter, BC-145, is supplied with the charger depending on version.
Charging time: 1.5 to 2 hours. BC-119N is also available for rapid charging.

BC-121N MULTI-CHARGER + AD-94 (Ver. 11) DESKTOP CHARGER ADAPTER + BC-157 AC ADAPTER




For rapid charging of up to 6 battery packs (Six AD-94s are required), BP-209, BP-210 or BP-222.
An AC adapter, BC-124, may be supplied, depending on version.
Charging time: 1.5 to 2 hours.

SPEAKER-MICROPHONES

HM-46L: Slim dimensions. Equipped with an earphone jack and a transmit indicator.

HM-75A: Allows you to remotely select operating channel, etc., according to program.

HM-131L:Compact and durable body. Equipped with an earphone jack and a revolving clip.

HEADSET

HS-51: For hands-free operation. Includes VOX, PTT and “one-touch” PTT with a time-out timer.

INTERNAL UNITS

UT-108 : DTMF DECODER Provides DTMF decode and ANI capabilities.

UT-109/UT-110 : VOICE SCRAMBLER UNITS
Provides operating security.
UT-109: Non rolling type.
UT-110: Rolling type.

CS-V8 CLONING SOFTWARE + OPC-478 CLONING CABLE
Provides quick and easy programming of memory channel, memory names, etc.


BELT CLIPS

MB-68: Flat type clip.

MB-74: Alligator type clip.

MB-87: Swivel belt clip.


OPC-474 CLONING CABLE
Used for transceiver-to-transceiver data cloning.


OPC-656 DC POWER CABLE

For use the BC-121N with a DC power supply.

SP-13 EARPHONE

Provides clear audio even in noisy environments.